ADD: 3th Floor, Building 5, Xin Xin Tian Technology Park, Xin Sha Road, Sha Jing, Baoan District, Shenzhen, China TEL: +86-755-23301466 E-MAIL: Peter@minipow.com
1. Connect one end of the hitch-hiking line to the positive pole of the battery without power, and the other end of the hitch-hiking line to the positive pole of the battery of the rescue car;
2. Connect the negative terminal with the negative terminal of the rescue car battery, and connect the other end with the engine block itself or the metal parts on the cylinder block. Do not connect the cable to the negative electrode of the battery (otherwise it will generate a spark to ignite the explosive gas escaping from the battery.
3. Put the gear in neutral position and tighten the hand brake. Shut down all electrical equipment of the rescue vehicle. The rescue workers should stand on the side of the rescue vehicle and confirm that there is no one in front of the rescue vehicle. Inform the customer to start the faulty car, and check whether there is any abnormal or overheating in the connection. If there is, stop the car immediately.
4. After successful startup, check the generating capacity of the failure vehicle. If normal operation is required, remove the positive pole of the rescue vehicle and the negative pole of the rescue vehicle after 5--10 minutes of high idle speed. Check the generating capacity of the rescue vehicle is normal. If the generating capacity is normal, the faulty car can be put out after running for at least 30 minutes, and the owner should be informed to go to the repair shop for inspection.